- Make sure this fits by entering your model number.
- Waterproof to IPX7 (2 meters, 30 minutes)
- Precision machined unibody casing from premium grade aluminum bar stocks
- Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
- Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
- Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Cree XP-L2 EasyWhite LED – Nominal CCT 4000K, Typical CRI: 93-95, Tint deviation: 2-step. User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels. Light Output (runtimes) – High: H1 276 Lm (0.9 hr) or H2 230 Lm (1.6 hr) / 165 Lm (2.3 hrs) / 102 Lm (4.2 hrs), Medium: M1 55 Lm (8.5 hrs) or M2 25 Lm (21 hrs) / 10 Lm (41 hrs) / 3.4 Lm (4.5 days), Low: L1 1.0 Lm (13 days) or L2 0.26 Lm (1.1 month) / 0.06 Lm (2.2 months) / 0.01 Lm (3.3 months). Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1. Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes. Operating Voltage Range: 0.7V – 2.0V. Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box. Parasitic Drain: Negligible (much less than the self discharging of a battery). Beam Type: Floody beam from frosted lens, with 90 degree beam spread. Dimensions: Head Diameter: 0.86 inch (21.8 mm), Length: 2.9 inch (75 mm), Weight 1.1 oz (31 gram), 2.0 oz (56 gram) with an Eneloop AA battery, 2.8 oz (79 gram) with an Eneloop AA battery and headband. Features: Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start); All levels are current regulated; Durable electronic soft-touch switch; Durable natural hard anodized finish (Type III Class I); Sealed and potted LED driver circuitry; Battery reverse polarity protection; Tempered optical grade glass; Orange peel reflector; Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain.